In our previous posts, we discussed how Dexedโs Operators were the fundamental building blocks of the synth – 6 sine-wave oscillators you use to build sounds. Just as important, and probably more so, is the way that the operators interact in Dexed, using frequency modulation (FM) to create new and interesting textures through their interactions. While weโre building this sound engine of FM synthesis using the 6 operators, we need a few FM maps to understand how we get to our destination of new and unique sounds. Those maps are called algorithms in dexed, and there are 32 of them. Thirty-two algorithms show us how the 6 operators interact to create the FM sound we are designing. In this installment, weโll look at a few of them.
A few words about FM synthesis
This user manual is not meant to be a tutorial on FM synthesis, but one on maximizing your enjoyment of Dexed. There are better, more detailed guides on FM synthesis on the web, including Howard Masseyโs โThe Complete DX7โ, the โYamaha DX7 manualโ, and for a really detailed understanding of FM, โFM Theory and Applicationsโ by Dr. John Chowning and David Bristow. Please check our Resources section below for ideas on where to find these texts. They are a โtreasure troveโ of information, and as you develop more skills in programming Dexed, you may want to refer to these books to gain a deeper understanding of the technology. For our purposes, weโll talk about FM at a high level, understand the potential sonic output of various algorithms, and learn how to generate and control the Operators to bend to our will. This installation is a brief overview of the Algorithms, and weโll start to work with them more closely in future installments.
Algorithms

There are 32 algorithms in Dexed and the DX7. The algorithm within a voice can be viewed at the bottom center of the Dexed display, just above the keyboard. You can change the algorithm of a voice freely, but be aware that changing the algorithm likely will drastically affect the character of the sound you are editing. The algorithm for the current voice is selected with the algorithm knob – turned all the way left, Algorithm 1 is selected, and in turn, all the way right is Algorithm 32. Letโs look at three of the thirty-two algorithms, reading the โmapโ of operators, and understanding their differences.

Algorithm 1: Where voices go to be born
Pressing the โINITโ button in the lower-left corner of Dexed creates an initialized sound, with un-shaped envelopes (EGs), a flat Pitch EG, limited modulation, and the selection of Algorithm 1. Itโs very likely that all Factory DX7, and Dexed, voices were born here. In the algorithm section of Dexed, we see a diagram of six numbers with lines connecting them – but what does it mean? These lines and blocks show how, under the hood, the Dexed operators interact. While there are six operators in Dexed, they each can have two roles within the FM engine – they can either be a carrier or a modulator. In an analog synth that has two oscillators per voice, each of the two oscillators would be similar to carriers in FM. Carriers are the โfoundationโ tones that you hear the synthesizer output, while modulator operators affect changes, via FM, to these carrier tones. In short, the modulators allow the creation of those dynamic, high-harmonic tones by transforming how the carrier tones are played back.
These graphic representations show us the roles and responsibilities of each operator and tell us which is a carrier, and which is a modulator. In Algorithm 1, Operator 1 and Operator 3 are carriers, while Operators 2, 4, 5, and 6 are modulators.
The location of the blocks with a “1” and a “3”, at the bottom of the algorithm graphic indicates that they are the carriers.

What we also can determine in this algorithm is that the output sound is the sum of operators 1 and 3, after all of the stuff is done to them by the modulators, as shown by the lines that connect 2, 4, 5, and 6 vertically to 1 and 3.

Operator 1 is modulated by Operator 2, and Operator 3 is modulated by Operator 4, which is modulated by Operator 5, which is modulated in turn by Operator 6. This is a heady concept, that a modulator can be affected by another modulator (and others after that!), and that crazy modulation is what FM synthesis brings to the table.
There is also another detail in Algorithm 1 to note in regards to Operator 6. Youโll notice that it has a line that loops back on itself. This โlooping back on itselfโ behavior in FM is called โFeedbackโ, and the amount of it is controlled by the โFeedbackโ knob in the Algorithm section. An oscillatorโs output modulating its input is a recipe for lots of seemingly random behavior, and the result is generally lots of harmonics being generated in the sound. As such, Feedback is very handy for adding noise – which can be controlled by an EG – into a sound. As examples, think of the transients of a plucked string or the short white noise at the start of a horn sound – these are perfect applications of the Feedback parameter in an algorithm.

Algorithm 5: A Triple Threat
Here the operator output takes a turn. In Algorithm 5, there are three carriers and three modulators – different from Algorithm 1. In Algorithm 1, the modulated output of Operator 1 was added to the modulated output of Operator 3, creating a potential 50-50 contribution of each output to the final sound. What I mean by this is that depending on the programmed output level of the two operators, you could hear 50% Operator 1 and 50% Operator 2 in the signal. In Algorithm 5, because there are three carriers, they all represent up to 33% of the final output. Similarly, in algorithms that have more carriers, their outputs still add up to 100%. To be clear, you can program a sound to have an output less than 100% of the maximum, but whatever you program as the final output levels, the sums of the outputs of the individual carriers will not exceed that.
In Algorithm 5, Operator 1 is modulated, by Operator 2, Operator 3 is modulated by Operator 5, and Operator 5 is modulated by the crafty Operator 6, which can modulate itself with Feedback. One thing I have not mentioned before in the Algorithm discussion – the graphic representation of the Algorithm in dexed also reflects the On / Off status of each Operator. In Algorithm 5, if we reach up and turn off Operator 3 using the On / Off switch for the Operator, the Algorithm display is updated accordingly., and the audio path – represented by the turquoise line – is turned off as well. Turning off Operator 3 in this example also disables the effect that its modulator, Operator 4 has on the output.

Algorithm 17: Abandon all hope, ye who enter here
Just kidding – itโs not that serious. What is serious about Algorithm 17 (and 18 as it turns out) is that you have available a single carrier and 5 modulators. This presents a tremendous amount of modulating goodness in the sounds that are designed using this choice. If you switch back and forth between Algorithm 17 and 18, youโll notice some differences. In Algorithm 18, you can have an unmodulated carrier contribute to the output sound – similar to what you would get in 17 with the Feedback parameter set to zero.

Summing Up (Operators), the Final Output
In Dexed, six Operators can assume the role of either Carrier or Modulator and the algorithm display gives us a view into how these Operators interact to create an output. The big question in my mind always was โBut really, how much difference is there between the 32 algorithms available?โ The answer is: โIt dependsโ. It depends on the sound designerโs desired output, whether they want to create a heavily modulated FM percussive sound or a multi-operator harmonic organ sound. There are algorithm choices to be considered at the start of designing a sound that will assist you – it just depends on your desired end result.
It turns out that in later versions of FM from Yamaha and now other companies, there are even more algorithms and more options to make the modulators affect the carriers. Thatโs the beauty of working with Dexed, however – it emulates the DX7 perfectly and adds visual tools that make learning FM synthesis easier than using the 2×16 display originally available in the DX7. Becoming knowledgeable in Dexed is a great stepping stone because you can use your work in Dexed to build knowledge that you can apply to other FM synths, like FM8 by Native Instruments, the Yamaha FS1R, or the OpSix by Korg.
In our next installment, weโll build our first, but basic, FM sound, starting from the Init Patch and move forward from there. Thanks for reading!
Resources
- The Dexed plug-in:
- The sounds included with Dexed:
- SoundEngineโs Rebuild: dexed (Sounds, documentation, and tutorials):
- Our custom programmed bank โ Flywheel: Dexed:
- https://soundengine.com/product/dexed-flywheel/
- https://soundengine.com/product/dexed-flywheel/
- More on FM synthesis:
- Our Dexed series so far:


Leave a Reply
You must be logged in to post a comment.